306839, 805843 TWO (2) NEW 5/8"-18 CASTLE/SLOTTED NUTS FOR THE REAR AXLES TO REPLACE CUSHMAN PART TRUCKSTER HAULSTER
For the three or four wheeled cushman truckster/haulster or other cushman, EZ-GO, or automotive applications.
SO THESE ARE 5/8" I.D. AND 18 THREADS PER INCH. YOU WOULD USE A 15/16" WRENCH TO TIGHTEN HERE ARE THE SPECS: THE CASTLE/SLOTTED NUT IS APPROX. .927"/23.55MM O.D. AND .573"/14.5MM I.D. THE HEIGHT OF THE WHOLE CASTLE/SLOTTED NUT FROM TOP TO BOTTOM IS APPROX. .549"/13.95MM.
If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.
For the three or four wheeled cushman truckster/haulster or other cushman, EZ-GO, or automotive applications.
SO THESE ARE 5/8" I.D. AND 18 THREADS PER INCH. YOU WOULD USE A 15/16" WRENCH TO TIGHTEN HERE ARE THE SPECS: THE CASTLE/SLOTTED NUT IS APPROX. .927"/23.55MM O.D. AND .573"/14.5MM I.D. THE HEIGHT OF THE WHOLE CASTLE/SLOTTED NUT FROM TOP TO BOTTOM IS APPROX. .549"/13.95MM.
If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.
For the three or four wheeled cushman truckster/haulster or other cushman, EZ-GO, or automotive applications.
SO THESE ARE 5/8" I.D. AND 18 THREADS PER INCH. YOU WOULD USE A 15/16" WRENCH TO TIGHTEN HERE ARE THE SPECS: THE CASTLE/SLOTTED NUT IS APPROX. .927"/23.55MM O.D. AND .573"/14.5MM I.D. THE HEIGHT OF THE WHOLE CASTLE/SLOTTED NUT FROM TOP TO BOTTOM IS APPROX. .549"/13.95MM.
If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.
