819804 TWO (2) NEW OEM WHEEL MOUNTING LUGS/SCREWS/BOLTS 7/16"-20 X 1.75" CUSHMAN PART TRUCKSTER HAULSTER
SO THESE ARE SHAFT DIAMETER OF 7/16" AND 20 THREADS PER INCH.
THE MEASUREMENT OF THE SHAFT UNDER THE HEAD IS 1.75".
THE MOUNTING AREA/KNURL IS .465" WIDE.
THE MOUNTING PART-THE KNURL IS FATTER THAN 7/16" BUT YOU POUND OR PRESS IT IN PLACE.
YOU WOULD USE THESE IN THE BRAKE DRUM AND HUB WITH THE 7/16" HOLE.
THESE ARE MAINLY FOR THE FRONT OF THE VEHICLE OF THE 80'S AND NEWER MODELS, BUT APPLICATIONS MAY VARY.
PLEASE LOOK AT YOUR LUGS CAREFULLY BEFORE YOU PURCHASE.
THIS IS FOR MULTIPLE MODELS OF CUSHMAN TRUCKSTER/HAULSTER SCOOTERS/MOTORCYCLES/VEHICLES.
SO THESE ARE SHAFT DIAMETER OF 7/16" AND 20 THREADS PER INCH.
THE MEASUREMENT OF THE SHAFT UNDER THE HEAD IS 1.75".
THE MOUNTING AREA/KNURL IS .465" WIDE.
THE MOUNTING PART-THE KNURL IS FATTER THAN 7/16" BUT YOU POUND OR PRESS IT IN PLACE.
YOU WOULD USE THESE IN THE BRAKE DRUM AND HUB WITH THE 7/16" HOLE.
THESE ARE MAINLY FOR THE FRONT OF THE VEHICLE OF THE 80'S AND NEWER MODELS, BUT APPLICATIONS MAY VARY.
PLEASE LOOK AT YOUR LUGS CAREFULLY BEFORE YOU PURCHASE.
THIS IS FOR MULTIPLE MODELS OF CUSHMAN TRUCKSTER/HAULSTER SCOOTERS/MOTORCYCLES/VEHICLES.
SO THESE ARE SHAFT DIAMETER OF 7/16" AND 20 THREADS PER INCH.
THE MEASUREMENT OF THE SHAFT UNDER THE HEAD IS 1.75".
THE MOUNTING AREA/KNURL IS .465" WIDE.
THE MOUNTING PART-THE KNURL IS FATTER THAN 7/16" BUT YOU POUND OR PRESS IT IN PLACE.
YOU WOULD USE THESE IN THE BRAKE DRUM AND HUB WITH THE 7/16" HOLE.
THESE ARE MAINLY FOR THE FRONT OF THE VEHICLE OF THE 80'S AND NEWER MODELS, BUT APPLICATIONS MAY VARY.
PLEASE LOOK AT YOUR LUGS CAREFULLY BEFORE YOU PURCHASE.
THIS IS FOR MULTIPLE MODELS OF CUSHMAN TRUCKSTER/HAULSTER SCOOTERS/MOTORCYCLES/VEHICLES.
