879476 ONE (1) NEW REAR AXLE FLANGE HUB OUTER RETAINER WITH GREASE/OIL SEAL AND GASKET TO REPLACE CUSHMAN PART. FOR THREE OR FOUR WHEELED TRUCKSTER HAULSTER. INCLUDES 814489, 814488, 808303.
For the three or four wheeled cushman truckster/haulster.
ITEM INCLUDES THE RETAINER TO REPLACE CUSHMAN PART# 814489, SEAL TO REPLACE #814488, AND GASKET TO REPLACE #808303.
HERE ARE THE SPECS: THE MOUNTING HOLES ARE 5/16" (THE FOUR HOLES WHERE THE BOLTS GO), THE SEAL INSIDE DIAMETER (WHERE THE AXLE GOES) IS APPROX. 1.41"/35.80MM I.D., THE SPACING BETWEEN HOLES (PLEASE SEE PIC, MEASURED FROM MIDDLE OF HOLE TO MIDDLE OF HOLE) IS APPROX. 2.096"/53.25MM. THE HOLE WHERE YOU WOULD PUT IN THE NEW SEAL IS ONLY 2" ID, SO THE OEM 814488 OEM SEAL DOES NOT FIT INTO THIS RETAINER.
This is for one side only.
IF YOU ARE UNSURE THIS FITS YOUR MODEL, PLEASE JUST ASK US A QUESTION AND WE CAN DOUBLE CHECK FOR YOU.
For the three or four wheeled cushman truckster/haulster.
ITEM INCLUDES THE RETAINER TO REPLACE CUSHMAN PART# 814489, SEAL TO REPLACE #814488, AND GASKET TO REPLACE #808303.
HERE ARE THE SPECS: THE MOUNTING HOLES ARE 5/16" (THE FOUR HOLES WHERE THE BOLTS GO), THE SEAL INSIDE DIAMETER (WHERE THE AXLE GOES) IS APPROX. 1.41"/35.80MM I.D., THE SPACING BETWEEN HOLES (PLEASE SEE PIC, MEASURED FROM MIDDLE OF HOLE TO MIDDLE OF HOLE) IS APPROX. 2.096"/53.25MM. THE HOLE WHERE YOU WOULD PUT IN THE NEW SEAL IS ONLY 2" ID, SO THE OEM 814488 OEM SEAL DOES NOT FIT INTO THIS RETAINER.
This is for one side only.
IF YOU ARE UNSURE THIS FITS YOUR MODEL, PLEASE JUST ASK US A QUESTION AND WE CAN DOUBLE CHECK FOR YOU.
For the three or four wheeled cushman truckster/haulster.
ITEM INCLUDES THE RETAINER TO REPLACE CUSHMAN PART# 814489, SEAL TO REPLACE #814488, AND GASKET TO REPLACE #808303.
HERE ARE THE SPECS: THE MOUNTING HOLES ARE 5/16" (THE FOUR HOLES WHERE THE BOLTS GO), THE SEAL INSIDE DIAMETER (WHERE THE AXLE GOES) IS APPROX. 1.41"/35.80MM I.D., THE SPACING BETWEEN HOLES (PLEASE SEE PIC, MEASURED FROM MIDDLE OF HOLE TO MIDDLE OF HOLE) IS APPROX. 2.096"/53.25MM. THE HOLE WHERE YOU WOULD PUT IN THE NEW SEAL IS ONLY 2" ID, SO THE OEM 814488 OEM SEAL DOES NOT FIT INTO THIS RETAINER.
This is for one side only.
IF YOU ARE UNSURE THIS FITS YOUR MODEL, PLEASE JUST ASK US A QUESTION AND WE CAN DOUBLE CHECK FOR YOU.
