800743 CUSHMAN HAULSTER TRUCKSTER-TWO (2)-AXLE SLOTTED NUTS 3/4"-16 PART REAR/FRONT
For the three or four wheeled cushman truckster haulster or other cushman applications.
SO THESE ARE 3/4" I.D. AND 16 THREADS PER INCH. YOU WOULD USE A 1-1/8" WRENCH TO TIGHTEN.
HERE ARE THE SPECS: THE SLOTTED/CASTLE NUT IS APPROX. 1-1/8" O.D. AND 3/4" I.D. THE HEIGHT OF THE WHOLE CASTLE NUT FROM TOP TO BOTTOM IS APPROX. 5/8".
THESE ARE FOR NEWER MODELS IN THE 1990'S WITH LARGER AXLES.
MAY BE USED FOR OTHER APPLICATIONS.
If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.
For the three or four wheeled cushman truckster haulster or other cushman applications.
SO THESE ARE 3/4" I.D. AND 16 THREADS PER INCH. YOU WOULD USE A 1-1/8" WRENCH TO TIGHTEN.
HERE ARE THE SPECS: THE SLOTTED/CASTLE NUT IS APPROX. 1-1/8" O.D. AND 3/4" I.D. THE HEIGHT OF THE WHOLE CASTLE NUT FROM TOP TO BOTTOM IS APPROX. 5/8".
THESE ARE FOR NEWER MODELS IN THE 1990'S WITH LARGER AXLES.
MAY BE USED FOR OTHER APPLICATIONS.
If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.
For the three or four wheeled cushman truckster haulster or other cushman applications.
SO THESE ARE 3/4" I.D. AND 16 THREADS PER INCH. YOU WOULD USE A 1-1/8" WRENCH TO TIGHTEN.
HERE ARE THE SPECS: THE SLOTTED/CASTLE NUT IS APPROX. 1-1/8" O.D. AND 3/4" I.D. THE HEIGHT OF THE WHOLE CASTLE NUT FROM TOP TO BOTTOM IS APPROX. 5/8".
THESE ARE FOR NEWER MODELS IN THE 1990'S WITH LARGER AXLES.
MAY BE USED FOR OTHER APPLICATIONS.
If you are unsure this fits your cushman model, please ask us a question to verify this fits before you buy.
